Installation Notes - Icom IC-910H Instruction Manual

We Icom Inc. Japan
1-1-32 Kamiminami, Hirano-ku,
Osaka 547-0003 Japan
Declare on our sole responsibility that this equipment complies the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/CE, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment:
Type-designation:
Version (where applicable):
This compliances is based on conformity according to Annex III of the
directive 1999/5/EC using the following harmonised standards:
i) EN 301 489-1 v1.4.1 (2002-08)
ii) EN 301 489-15 v1.2.1 (2002-08)
iii) EN 301 783-2 v1.1.1 (2000-09)
iv) EN 60950-1 (2001): A11: 2004
v)
Version and frequency coverage
Version 144 MHz
Europe (#02) 144.0–146.0
Sweden (#05) 144.0–146.0
Italy (#08) 144.0–146.0
• About AG-25, AG-35 and AG-1200 preamplifiers
The use of IC-910H (#02, #05, #08) in combination with AG-25, AG-35
and/or AG-1200 preamplifiers do not comply with the European Harmon-
ised Standard regulations. Please do not use the IC-910H with these pre-
amplifiers (AG-25, AG-35 and/or AG-1200) intended for the US, Asian,
Oceanian and African markets.
VHF/UHF ALL MODE TRANSCEIVER
i910H
430 MHz 1200 MHz*
430.0–440.0 1240.0–1300.0
432.0–438.0 1240.0–1300.0
430.0–434.0 1240.0–1245.0
435.0–438.0 1270.0–1298.0
* Optional UX-910

INSTALLATION NOTES

DECLARATION
OF CONFORMITY
Düsseldorf 17th July 2007
Place and date of issue
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Authorized representative name
H. Ikegami
General Manager
Signature
16
83