About Operation - Rockford Fosgate SYMMETRY EPX2 Installation & Operation Manual

DCard
This option is used to adapt the software when installing or un-
installing optional DCard modules into the EPX
adapt DCard software, select D-Card from the Setup menu. The
following will be displayed.
Setup / D-Card: Select options.
E14 [ * ]
The asterisk * inside the E14 brackets [
software is currently installed and adapted. If installing an E28
equalization module, select E28 by pressing the corresponding
function key.
When un-installing optional modules in the EPX
DCard software may be disabled by pressing the corresponding
function key again. The asterisk will then be removed from the
brackets. To return to the previous menu, press ESC.
A O
BOUT
The About function displays the software version currently installed
in the RDAT. Since the EPX
easily be updated as new features are developed. To access this
function, select About from the Main Menu. The following will be
displayed.
A few moments later the screen will automatically change to the
following.
E28 [ ]
PERATION
is software controlled, the program can
2
*SYMMETRY*
was created by WAYNE HARRIS
*SYMMETRY*
EPX BIOS: __•_____
- 36 -
main housing. To
2
] indicates that the E14
main housing, the
2