Crossover Operation - Rockford Fosgate SYMMETRY EPX2 Installation & Operation Manual

C
R O S S O V E R
To adjust the EPX
main menu. The following options will be displayed.
LP
Low-Pass Adjustment
To access the crossover's low-pass section, select LP from the
crossover menu. The following screen will be displayed.
F3 = 200
In the display above, F3 indicates the currently selected low-pass
crossover frequency in Hz. The crossover frequency is also repre-
sented graphically on a 20Hz-20kHz log scale.
To adjust the low-pass crossover point, use the left/right multipur-
pose keys. Press ESC to return to the previous menu. Changes will be
saved automatically.
O
P E R AT I O N
active electronic crossover, select XOVER from the
2
* CROSSOVER MENU *
BP
20 200
- 23 -
HP
2K 20K