Preamp Operation; Fader Control; Tone Control - Rockford Fosgate SYMMETRY EPX2 Installation & Operation Manual

P
R E A M P
Source Name
To name the source, first select which Source is to be named (A or B),
then select Name. The following will be displayed.
Use arrow keys to change source name.
[ A ]
Use the left/right multipurpose keys to select cursor position and the
up/down multipurpose keys to select characters. Upon completion,
press the corresponding function key.

Fader Control

To adjust the EPX
The following display will appear.
L |||||||||||||||||||||||||||||||||||||||| R
Balance
To adjust the Left/Right Balance, use the left/right multipurpose keys.
To adjust the Front/Back Fader, use the up/down multipurpose keys.
To reset Balance and Fader to their default positions, press the center
multipurpose key. To return to the previous menu, press ESC.

Tone Control

To adjust the EPX
The following display will appear.
– |||||||||||||||||||||||||||||||||||||||| +
< 45 Hz >
The bracket < > around 45Hz indicates that the 45Hz tone control
is currently selected. Use the left/right multipurpose keys to switch
between the two tone controls.
Use the up/down multipurpose keys to boost or cut the currently
selected tone control. Press the center multipurpose key to set both
tone controls to their neutral (flat) positions. To return to the previous
menu, press ESC.
O
P E R AT I O N
B
fader control, select Fader from the preamp menu.
2
tone controls, select Tone from the preamp menu.
2
-19 -
F |||||||||||||||||||||||||||||||||||||||| B
Fader
– |||||||||||||||||||||||||||||||||||||||| +
15 kHz