Lock Lever Adjustment; Lock Lever Bracket Adjustment - Honda Marine BF75A Owner's Manual

Lock Lever Adjustment

A loose engine cover may rattle or
allow water to enter. Check whether
the engine cover fits properly and
adjust if necessary.
Engine Cover Clearance
Inspection
FRONT
0.19
(4.8
INSPECTION POINT
0.23 in
INSPECTION POINT
5.8 mm)
With the engine cover in place and
both front and rear lock levers in the
locked position, measure the
clearance between the engine cover
and the engine undercase at the lock
levers.
Specified engine cover clearance:
0.19 0.23 in (4.8
If the clearance is outside the
specified range, adjust the lock lever
brackets.
SERVICING YOUR OUTBOARD MOTOR
REAR
0 0 . . 1 1 9 9 0 0 . . 2 2 3 3 i i n n
( ( 4 4 . . 8 8 5 5 . . 8 8 m m m m ) )
5.8 mm)
Lock Lever Bracket
Adjustment
1. Remove the engine cover.
HOOK BRACKET
RETAINING BOLT
2. Loosen the retaining bolts on the
front and/or rear lock lever
brackets, and move the hook
bracket(s) as necessary to obtain
the specified engine cover
clearance.
3. After adjustment, tighten the
retaining bolts securely, and install
the engine cover.
4. Recheck the engine cover
clearance, and readjust if necessary.
75