Controls; Lht Type (Tiller Handle) Ignition Switch; Switch Clip And Emergency Stop Switch - Honda Marine BF75A Owner's Manual

Hide thumbs Also See for Marine BF75A:
Table of Contents

Advertisement

CONTROLS

LHT Type (tiller handle)
Ignition Switch
IGNITION SWITCH
ON
START
The ignition switch controls the
ignition system and starter motor.
Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the ON position when released
from the START position.
The engine will not start unless the
gearshift lever (p.
(neutral) position, and the emergency
stop switch clip is in the emergency
stop switch.
Turning the ignition switch to the
OFF position stops the engine.
Switch Clip and Emergency Stop
Switch
EMERGENCY STOP SWITCH
OFF
CONTROLS AND FEATURES
45
) is in the N
SWITCH
CLIP
LANYARD
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard should be attached to the
operator's PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in a slot
in the control housing.
SPARE SWITCH CLIP
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Marine bf90a

Table of Contents