Cooling Fin Inspection; Recommended Cutting Attachments; Cutting Attachment Applications; Blades - Honda HHT25S Owner's Manual

5. Rinse sediment from the fuel tank with nonflammable solvent.
6. Insert the fuel filter in the fuel tank and install the fuel tank cap.

COOLING FIN INSPECTION

1. Remove the 5 x 12 mm hex bolt and top cover. Inspect the engine
cooling fins and clean out any dirt and debris.
ENGINE COOLING FINS
2. Install the top cover and 5 x 12 mm hex bolt, and then tighten
securely.
RECOMMENDED CUTTING
ATTACHMENTS

CUTTING ATTACHMENT APPLICATIONS

ATTACHMENTS FOR TRIMMING GRASS AND LIGHT WEEDS
ATTACHMENTS FOR CUTTING THICK WEEDS AND LIGHT
BRUSH
18
ATTACHMENTS FOR CUTTING WOODY BRUSH, SHRUBS,
SAPLINGS
Your Honda trimmer servicing dealer has cutting attachments that
have been designed and approved for your trimmer and are covered
by warranty. Non-Honda attachments are usually designed for
universal applications. Although aftermarket attachments may fit on
your trimmer, they may not meet factory specifications and could
make your trimmer unsafe.

BLADES

If installing a metal blade on a Honda trimmer equipped with a loop
handle, also install the optional barrier kit that includes a full shoulder
harness, a barrier bar, and a debris shield for metal blades. Follow the
safety information and installation instructions that come with the kit.
Grass/Weed Blades
Grass/weed blades, which may be
plastic or metal, are used as an
alternative to nylon monofilament line
for cutting grass and ordinary weeds.
However, blades should never be used
for edging against solid surfaces.
Weed/Brush Blades
These metal blades have
chisel-shaped teeth that are used for
cutting through field grass, thick weeds,
and light brush. They are not designed
for sawing woody material. The teeth
must be sharp for good results.
Brush/Wood Blades
These metal saw-tooth blades are used
for sawing through saplings, shrubs
and woody brush. The teeth must be
sharp for good results. Brush/wood
blades will also cut grass and weeds,
but they are not efficient for that
purpose.
Blade Cover
Use the blade cover to protect yourself
from injury while installing or removing
the blade and to protect the blade from
damage during storage.