Section 2: Power Supply - Grizzly g4003g Owner's Manual

section 2: poWer supply

availability
Electrocution,
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
full-load current rating
full-load current rating at 220v ....... 9 amps
Model g4003g (Mfg. since 4/08)
Serious injury could occur if you connect
the machine to power before completing the
setup process. DO NOT connect to power
until instructed later in this manual.
circuit requirements for 220v
nominal voltage .............................. 220v/240v
cycle ..........................................................60 hz
fire, or
phase .................................................... 1-phase
power supply circuit ......................... 15 amps
plug/receptacle .......................... 6-15 or l6-15
cord ........"s"-type, 3-Wire, 14 aWg, 300 vac
For your own safety and protection of
property, consult a qualified electrician if
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
-11-