Chuck & Faceplate Mounting; Installation & Removal Devices - Grizzly G0750G Owner's Manual

12" x 36" gunsmith's lathe
Hide thumbs Also See for G0750G:
Table of Contents

Advertisement

chuck & faceplate
Mounting
this lathe is equipped with a d1-type spindle
nose. this type of spindle uses camlocks that are
adjusted with a chuck key to securely mount a
chuck or faceplate with repeatable precision and
ease.
Never use spindle speeds faster than the
chuck RpM rating or the safe limits of
your workpiece. Excessive spindle speeds
greatly increase the risk of the workpiece or
chuck being thrown from the machine with
deadly force!
this lathe ships with the 3-jaw chuck installed.
this is a scroll-type chuck where all three jaws
move in unison when the chuck key is used.
the included 4-jaw chuck features independent
jaws, which are used for square or unevenly-
shaped stock, and to mount work that needs to be
adjusted to near zero total indicated runout.
the included faceplate has slots for t-bolts that
hold standard or custom clamping hardware. With
the correct clamping hardware, a faceplate offers
a wide range of uses, including machining non-
concentric workpieces, straight turning between
centers, off-center turning, and boring.
Model G0750G (Mfg. Since 11/12)
Installation &
Removal Devices
Because chucks are heavy and often awkward
to hold, some kind of lifting, support, or protec-
tive device should be used during installation or
removal. the weight and size of the chuck will
determine the appropriate device to use (refer to
the following figure for examples).
Dropping a chuck can result in amputation,
serious crushing injuries, or property dam-
age. Always use a support or protective
device to reduce this risk during installation
or removal.
SMALL, LIGHTWEIGHT CHUCKS
Plywood Protection
Plate for Chucks
Installed by Hand
MEDIUM-SIZE, HEAVY CHUCKS
Plywood & 2x4
Chuck Cradle
Plywood Chuck Cradle
(Straight Cuts)
LARGE, VERY HEAVY CHUCKS
Pre-Threaded Hole
for Lifting Eye
figure 27. Examples of common devices used
during chuck installation and removal.
Solid Block
Chuck Cradle
Way Slot
Jaw Slot
Plywood Chuck Cradle
(Curved Cuts)
Fabricated Steel
Lifting Hook
-29-

Advertisement

Table of Contents
loading

Table of Contents