Summary of Contents for GReddy TYPE-RS BRS-313 CT9A
Page 1
BRS-313 BRS-313 CT9A BRS-313 BRS-313 CT9A CT9A CT9A Instruction Manual Instruction Manual Instruction Manual Instruction Manual Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this product.
SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION Important Important Important Important This Manual will explain the proper installation procedure of this product. ○ Please read this manual carefully. ○ This manual was created considering the vehicle to be completely factory spec. ○...
Page 3
GReddy Performance Products, Inc. GReddy Performance Products, Inc. GReddy Performance Products, Inc. GReddy Performance Products, Inc. 3- -...
PARTS LIST PARTS LIST PARTS LIST PARTS LIST BLOW OFF VALVE ZIP TIES 1. ×1 5. ×3 ADAPTER TUBE BLOW OFF GASKET 2. ×1 6. ×1 EMBLEM 3. 34φPLUG ×1 7. ×1 VACUUM HOSE BOLT・WASHER 4. 6φ×600㎜ ×1 8. ×2 PARTS LIST PARTS LIST PARTS LIST...
Page 5
Air Control Valve Hose Factory Air Bypass Valve Install the ‹№3›34φ plug into turbine air intake hose using factory hose band. ‹№3› Install ‹№1›GReddy Blow Off Valve, ‹№6›blow off gasket, ‹№8›bolt on the ‹№2›adaptor pipe. ‹№2› ‹№1› 5- -...
Page 6
Install the adaptor pipe using factory air hose and connect the 22Φ side of tube into the air control valve hose. Please install using factory hose band. ※ Air Hose Air Control Valve Hose Connect the ‹№4›6φ vacuum hose to the air tube that was connected on vacuum hose (factory air bypass valve) and connect the other end to the top cover...
Starting the engine Starting the engine Starting the engine Starting the engine (1) Inspect the installation. Reconnect the negative terminal of the battery and start the engine. (2) Check and make sure that there no air leeks, clearance problems or irregular sound. (3) Lightly rev up the engine couple times to check if the blow off valve is operating.
Page 8
How to change the Attachment How to change the Attachment The attachment on the GReddy Type RS is interchangeable with discharge funnel or hose attachment. To remove the attachment, turn it counter clock wise, and to install turn it clock wise.