BRS-112 BRS-112 BRS-112 BRS-112 JZA80 JZA80 JZA80 JZA80 Instructi Instructi Instructi Instruction Manual on Manual on Manual on Manual Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this product.
Page 2
SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION Important Important Important Important This Manual will explain the proper installation procedure of this product. ○ Please read this manual carefully. ○ This manual was created considering the vehicle to be completely factory spec. ○...
Page 3
GReddy Performance Products, Inc. GReddy Performance Products, Inc. GReddy Performance Products, Inc. GReddy Performance Products, Inc. 3- -...
Page 4
Parts List Parts List Parts List Parts List 1. Blow Off Valve ×1 9. Gasket ×1 2. Adapter ×1 10. Emblem ×1 3. Mounting Bracket ×1 11. Hex Bolt M6×15㎜ ×1 4. Oil Resistant Hose 19φ×650㎜ ×1 12. Hex Bolt M6×20㎜ ×2...
Page 5
Installation Installation Installation Installation (1) OEM ABV(Air Bypass Valve)、Remove the ABV hose and the vacuum hose for control. OEM ABV (2) Install the rubber plug cap (no.6) onto the location shown and secure it with a the provided hose clamp. ‹№6›...
Page 6
(4) Attach the Blow off valve to the adapter (no.2) with the gasket (no.9) between the BOV and the adapter. Use the hex bolts (no.14) to secure the BOV to the adapter. ‹№9› ‹№2› (5) Mount the BOV assembly to the mounting bracket using bolt (no.11).
Page 7
Starting the engine Starting the engine Starting the engine Starting the engine (1) Inspect the installation. Reconnect the negative terminal of the battery and start the engine. (2) Check and make sure that there no air leeks, clearance problems or irregular sound. (3) Lightly rev up the engine couple times to check if the blow off valve is operating.
Page 8
How to change the Attachment How to change the Attachment The attachment on the GReddy Type RS is interchangeable with discharge funnel or hose attachment. To remove the attachment, turn it counter clock wise, and to install turn it clock wise.
Need help?
Do you have a question about the TYPE-RS BRS-112 JZA80 and is the answer not in the manual?
Questions and answers