Grandstream Networks HT503 User Manual page 35

XML Config File
Password
HTTP/HTTPS User Name
HTTP/HTTPS Password
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Allow DHCP option 66 to
override server
Automatic Upgrade
Authenticate Conf File
Firmware Key
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Connection Request
Port
CPE SSL Certificate
FIRMWARE VERSION 1.0.9.1
The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Default is blank. If configured, HT503 will request the firmware file with the prefix. This
setting is useful for ITSPs. End user should keep it blank.
Default is blank. End users should keep it blank.
Default is blank. End users should keep it blank.
Default is blank. End users should keep it blank.
If set to "Yes", configuration and upgrade server information can be obtained using
DHCP option 66 from DHCP server located in customer's environment
Choose "Yes" to enable automatic upgrade and provisioning. When set to No, HT503
will only do upgrade once at boot up.
When "Check every day" or "Check every week" is checked, user can specify "Hour of
the day(0-23)" or "Day of the week(0-6)". Default time is Monday 1AM.
There are three options to choose from: "Always check for New Firmware at Boot up",
"Check New Firmware only when F/W pre/suffix changes", and "Always Skip the
Firmware Check".
This protects the configuration from an unauthorized change. If set to "Yes, the
configuration file is authenticated before acceptance.
Key for firmware encryption. (32 digits in hexadecimal format. End users should keep it
blank.
The user specify SSL certificate used for SIP over TLS in X.509 format.
The user specify SSL private key used for SIP over TLS in X.509 format.
User specify password to protect the private key above.
User specify the Auto Configuration Server's URL (TR-069 protocol)
User specify the ACS Username
User specify the ACS password
Default is No. If set to YES, device will send inform packets to the ACS
Frequency that the inform packets will be sent out to the ACS
Set a user name for the ACS to connect to this device
Set a password for the ACS to connect to this device
Set a port number for the ACS to connect to this device, default is 7547
Configure the SSL authentication of Customer-premises equipment
HT503 USER MANUAL
Page 35 of 59