Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Goldmund MIMESIS 18.4
Summary of Contents for Goldmund MIMESIS 18.4
- Page 1 GOLDMUND MIMESIS 18.4 POWER AMPLIFIER...
- Page 2 POWER AMPLIFIER USER MANUAL CONGRATULATIONS Thank you for purchasing the Goldmund Mimesis 18.4. You have acquired the best Analogue Power Amplifier ever made for professional and domestic uses. Please take some time to read this manual. It may provide you with useful information to make your pleasure of listening to the Mimesis 18.4 even...
-
Page 3: Choice Of Amplifier Location And Cooling
2 – CHOICE OF AMPLIFIER LOCATION AND COOLING The GOLDMUND MIMESIS 18.4 amplifier, as all high quality amplifiers generates a quite large amount of heat. It is mandatory to allow a proper cooling of the heat sinks. Avoid any location which is not properly vented and avoid to put on top of it equipment sensitive to temperature. -
Page 4: Amplifier Controls
The amplifier is non-inverting in phase. 5 – AMPLIFIER CONTROLS On the front panel of the GOLDMUND MIMESIS 18.4 amplifier you will find only the power key and 3 Led. To start playing the amplifier, switch the key to ON. The amplifier is immediately operative, without delay and the central green Led indicates it is operating normally. -
Page 5: Sound Quality Optimization
1 or 2 minutes. - Speaker polarity. Even if you have a phase inverter on your preamplifier (as on the GOLDMUND MIMESIS 2 or MIMESIS 22), and even if you have carefully selected the proper line... -
Page 6: Maintenance
There is no risk to leave the speaker terminals unconnected when the amp is on. 8 - MAINTENANCE The GOLDMUND MIMESIS 18.4 amplifier usually requires no maintenance. To clean your MIMESIS use only a soft cloth slightly wet. Always turn the power off... - Page 7 TECHNICAL DATA : POWER - Nominal power : 200 W RMS (2 - 8 Ohms). 120 W RMS (1 - 16 Ohms). - Maximum instantaneous power : 400 W RMS (8 Ohms). - Maximum voltage swing : 62 V peak. - Maximum current swing : 20 A peak.
-
Page 8: Warranty
- Earth connection switch to connect earth and signal ground (link-float). - Output speaker 2 X 5 ways post. - Output speaker Coaxial for Goldmund Speaker cable. - Analogue Input connectors : RCA and XLR for balanced input. - Digital Input connector RCA for input and output.