Setting Bandwidth Changes To Persist - Qlogic 8200 Series User Manual

f.
Figure 2-37. Setting Bandwidth Changes to Persist
6. Return to the NIC Partitioning <NPAR> Configuration Selection screen.
7. Change the personalities of each function to meet your system
requirements. For example:
a.
b.
c.
d.
NOTE:
SN0054671-00 B
Specify whether you want the bandwidth settings to persist across
reboots (Figure 2-37).
Select option 2: Change PCI Function Personality.
Select the port number,
Select the function number. The command line displays a list of
options with choices that apply to the selected function number. This
mode prevents you from assigning a function type that does not apply
to a given function number.
Set the personality type by selecting the option number that identifies
the desired function type. Depending on the function number and
current state, this could be
For a list of NPAR configuration options, see
page 2-68.
or .
1 2
, ,
Disabled NIC FCoE
"NPAR Setup" on
2–Configuring NIC
NIC Partitioning (NPAR)
, or .
iSCSI
2-59