Temperature Set Back Timer - Fujitsu ART90 Series Operating Manual

TEMPERATURE SET BACK TIMER

Temperature SET BACK timer setting
1
SET BACK
Press the SET BACK button to change to the SET BACK con-
firmation display.
The SET BACK operating time and the set temperature will
be displayed.
G Day setting
3
DAY
DAY OFF
1
Follow the same procedures to set the operating time as those for the weekly timer. The DELETE button is also used
as described in the procedures for the weekly timer.
G Temperature setting
4
SET BACK temperature
Normal temperature
Temperature SET BACK timer operation
G To start
SET BACK
Press the SET BACK button. The SET BACK confirmation display appears
for 5 seconds, and then the timer starts automatically.
NOTES
• The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
• The SET BACK timer can be set to operate up to two times per day but only one temperature setting can be used.
• The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
• The SET BACK operating time is displayed only in the SET BACK confirmation display. (Refer to step 1 for the SET BACK
confirmation display.)
9365350034_P1-P15
SU MO TU WE TH FR SA
3 6 9 12 15 18 21
G Operating time setting
SET
2
3
Press the set temperature buttons to set
the temperature. (The temperature setting
range is the same as the range for the
operation mode.)
SU MO TU WE TH FR SA
3 6 9 12 15 18 21
ex. Operating time 15:00–22:00
28°C
ON
24°C
SU MO TU WE TH FR SA
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
8
If there is no existing
SET BACK tempera-
ture setting, "- -" will
be displayed for the
temperature.
SU MO TU WE TH FR SA
SET
3 6 9 12 15 18 21
4
ex. When setting all days together
5
OFF
24°C
G To cancel
Press the SET BACK button, and then
press the DELETE button while the
SET BACK confirmation display is dis-
played. Even if the SET BACK button
is pressed again, the SET BACK timer
will be canceled.
4/25/05, 1:48 PM
2
SET
Press the SET button for 2
seconds or more.
SET
3 4
Repeat steps and .
Press the SET button for 2 sec-
onds or more to complete the
temperature SET BACK timer
settings.
SET BACK DELETE
2
1
8