Table of Contents
Advertisement
CLEANING AND CARE
CAUTION
●
When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be
inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
●
When cleaning the unit's body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene or
thinner.
●
Do not expose the unit body to liquid insecticides or hairsprays.
●
If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry thoroughly, in
advance, by operating the unit in fan mode for half a day.
Cleaning the Air Filter
1. Push the intake grille's hooks inward to-
wards the center of the unit to open the
intake grille.
2. Pull out the ¿ lter from the intake grille.
3. Clean the air ¿ lter.
Remove the dust from the air ¿ lters by vacuuming or washing
them. After washing, allow the air ¿ lters to dry thoroughly in
an area protected from sunlight.
●
Dust can be cleaned from the air ¿ lter either with a vacuum
cleaner, or by washing the ¿ lter in a solution of mild deter-
gent and warm water. If you wash the ¿ lter, be sure to allow
it to dry thoroughly in a shady place before reinstalling.
●
If dirt is allowed to accumulate on the air ¿ lter, air À ow will
be reduced, lowering operating ef¿ ciency and increasing
noise.
Filter indicator Reset (A special setting)
●
Can be used if set correctly during installation. Please consult authorized service personnel when using this
function.
• It lights on when it is time to clean the air ¿ lters.
After turning the power on.
Press the MAINTENANCE button for
2 seconds or more on the remote control.
The ¿ lter indicator will disappear.
●
Before cleaning the unit, be sure to stop the unit and turn off the electrical breaker.
●
A fan operates at high speed inside the unit, and personal injury could result.
●
Be careful not to drop the intake grille.
●
As the ¿ lter cleaning involves high-altitude operation, please consult the professional technical service
personnel.
4. Re-attach the air filters to the intake
grille.
1 Replace the air ¿ lter into its holder.
2 Make sure that the air ¿ lter makes contact with the ¿ lter
stopper when it is replaced into its holder.
5. Close the intake grille and push the intake
grille's hooks outward.
15
Advertisement
Table of Contents
