Operation - Fujitsu Inverter AUTG54LR Operating Manual

OPERATION

Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
To start/stop operation
To set the operation mode
● Operation mode setting
●
Room temperature setting
Lower Rise
● Fan speed setting
ECONOMY operation
Press the START/STOP button.
Operation lamp
Air conditioner ON:
Air conditioner OFF: Not lit
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ...................................... 18 to 30 °C
HEAT * ............................................. 16 to 30 °C
Press the FAN button to set the fan speed.
HIGH
AUTO
Press the ECONOMY button to start or stop ECONOMY
operation.
For details on the function, refer to page 14.
Lit brightly
DRY
FAN
MED
LOW
HEAT *
QUIET
7