Obtaining Ip Information Using Ipconfig - Q-See QC SERIES Setup Manual

OBTAINING IP INFORMATION USING IPCONFIG

You will need to get your router settings to not only create an IP address, but for the Default
Gateway information as well.
To get the router settings:
STEP 1. To access the router's settings you will need to enter the Command (CMD)
panel on a computer also connected to the same router.
A. WINDOWS XP – Select Run from
your Windows START menu (lower
left of screen) and type "cmd" after
the prompt.
B. WINDOWS VISTA and WINDOWS
7 – Click on the START menu
(Windows icon) in the lower left of
your screen. Type "cmd" into the field
that says, "Search programs and
files" and hit ENTER or click on the
magnifying glass icon.
STEP 2. Type "ipconfig" at the prompt
(Red arrow in 4-37) to
Picture
access router settings.
STEP 3. Write down the IP4v address
(Blue arrow) as well as the gateway
and subnet mask numbers (Green
arrows).
76
Microsoft Internet Explorer
Microsoft Office Outlook 2007
Devices and Printers
iTunes Default Programs
Help and Support
Adobe Acrobat
Run
All Programs
Log Off Shut Down
Inbox Microsof... iTunes
start start
PICTURE 4-35
Microsoft Office Outlook 2007
Devices and Printers
Sticky Notes
Default Programs
iTunes
Help and Support
Adobe Acrobat
All Programs
cmd Shut down
PICTURE 4-36
PICTURE 4-37
Enter the information into the proper fields in ConfigTool's IP Address Modification window.
Click OK to save, and you will see the information update in the Device List.
Right-click on the camera to open it in the Web Service browser program and proceed as
described in Section 4.2, above.
77