What You Should Do First; Connect The Power; Install The Batteries Into The Remote Control; Select Your Language - Zenith SENTRY 2 SY2500 Operating Manual & Warranty

WHAT YOU SHOULD DO FIRST
(_) CONNECT THE POWER
,AFTER you have connected the necessary cable(s) to the jack [']l
on the TV Connection Center, plug the TV's power cord into
.an AC outlet. Make sure you do not plug the TV into a
_'switched" outlet (an outlet that is controlled by a switch).
Do not plug TV into switched outlet on a
VCR or cable-TV decoder
'_ INSTALL THE BATTERIES INTO THE REMOTE CONTROL
Batteries are provided for the remote, but they must be installed before it can be used.
To install the batteries
1. Open the battery compartment by sliding the cover toward the
end of the remote.
2. Take the batteries and match positive with positive (+ with +),
negative with negative (- with -) with the markings shown in the
battery compartment.
3. Replace the compartment cover.
Notes:
E2
[1
Do not place heavy objects on top of the remote control keys.
Prolonged unintentional operation of the remote shortens battery
life.
Remove the batteries if the remote control will not be used for a
month
or more. THE REMOTE CONTROL MANUFACTURER IS NOT
RESPONSIBLE FOR DAMAGE CAUSED BY BATTERY LEAKAGE.
Typical Remote Control Battery Compartment
(Uses 2 size AA batteries)
(3_
SELECT YOUR LANGUAGE
Your TV has on-screen menus which can appear in one of
three language:s; English, Spanish or French. Select the lan-
guage that you would be most comfortable with.
II To select a LANGUAGE
1. Press MENU repeatedly to view the Setup Menu.
' Use SELECT (Up/Down) arrow to select Language.
: . Use ADJ (Left/Right) arrow to choose a language.
4. Press ENTFR to remove the menu from view.
a,
Setup Menu
Auto Program
Ch. Add/Del
Clock Set
Timer Setup
Caption/Text
_-r,:q_____
[
English ---_
USE AUTO PROGRAM
The first time your TV is turned on, Auto Program will be se-
lected in the Setup Menu. Auto Program finds all available
channels and stores them in the memory of the TV.
To start AUTO PROGRAM
11. Press MENU repeatedly to view the Setup Menu.
2. Use SELECT (Up/Down) arrow to select Auto Program.
2L Use the Ar)J (Left/Right) arrow to move to the next menu.
,IL Use SELECT (Up/Down) arrow to choose either
OFF AIR ANTENNA or CABLE TV.
Setup Menu with Language Highlighted
Setup Menu
] I<_ To Program ]
5. Use ADJ (Left!Right) arrow to begin the channel search.
Auto Program
Ch. Add/Del
Clock Set
Timer Setup
Caption/Text
Language
Setup Menu with Auto Program Highlighted
3(_s-o 2 -- 1