Zenith SENTRY 2 SY2500 Operating Manual & Warranty page 8

STANDARD CONNECTIONS FOR YOUR TV
m i
SETUP3: TVANDVCR
If you receive your television signal through your VCR, connect
'our television as follows:
Cable I
A _1
&c II
D
NOTE:
Leading from..,
_ Connects to...
Wall .Jack- . VCR-
75-ohm cable from "In" jack.
Anterma or cable service
Not required.
VCR--
"Out to TV" jack
(75-ohm cable).
TV-
"ANTENNA/CABLE"
(In)jack.
O If your antenna has a fiat (300-ohm) wire leading from it, you
will have to attach this wire to a 300-75 ohm adapter before the
antenna can be connected to the VCR.
SETUP 4: TV WITH VCR AND CABLE BOX
If you receive your television signal through your VCR, connect
/our television as follows:
Cable
A
Leading from... !
i Not required.
Connects to...
B
Wall Jack- Cable Box-
75-ohm cable from cable "In" jack.
service.
C Cable Box- VCR-
"Out" (75-ohm cable). "Ant In" jack.
D VCR- TV-
"Out to TV .... ANTENNA/CABLE"
(75-.ohm cable). (In) jack.
"l
Fiat wire
from antenna ____
(300 ohm)
¢kNTENNMCABLE
300/75 ohm
Adaptor
• . ,. .... ";V.v:.:V:.v `'"
SETUP 3 and SETUP 4
3_145-m o 1 -- 2