Table of Contents
Advertisement
THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. CONNECT
THE POWER
Plug your TV into an tmswitched AC power source.
The switched AC outlets found on some video equipment
will not continue supplying power to the TV once the equip-
ment is turned off. If the power to the TV is interrupted,
you will have to set the clock in the TV to the current time.
Do not plug 'IV into switched
outlet on cable-TVdecoder
Do not plug TV into switched outlet on a VCR
STEP 2. TURN TV ON
Turn the TV on by pressing OFF-ON.
STEP 3. USE AUTO CH. (Channel)
SEARCH
When your TV is first powered up you will see the AUTO
CH. SEARCH
reminder
display. AUTO CH. SEARCH
finds all available channels and stores them in memory for
access by CHANNEL
(CH) Up/Down. To activate AUTO
CH. SEARCH,
press ADJUST
(ADJ) LeftfP, ight. When
the search is complete, you can watch the TV program of
your choice.
NOTES:
1. The AUTO
CH. SEARCH
reminder
display
ap-
pears
each
time you turn
on your TV until
it has
been used at least once.
2. Antenna
or cable must be connected
to TV before
you use AUTO
CH. SEARCH.
SETUP MENU
-> AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
START
Auto Ch. Search
Reminder
Display
(
I
DETERMINING
TUNING
BAND
E
Determining
Tuning Band
TUNING BAND IS
CH _--]
IS FOUND
While Searching for
Active Channels
f
IAUTO OL SEARCH HAS COMPLETEE
TUNING
BAND
IS
"--"1 CHANNELS
FOUND
CH2
STEREO
k..
_.
j
When Search is
When Returning to
Complete
Channel/Audio
Display
STEP 4. USE OTHER
OPTIONS
You may want to consider using the following options:
•
Program
the channels
accessed
by using CHANNEL
(CH) Up/Down.
Refer to CH. ADD/DEL
option of the
"Setup Menu" section of this operating guide for details.
Set the clock in the TV. Refer to the CLOCK SET option
of the "Setup Menu" section of this operating guide for
details.
2s89-o
2 -- 1
Advertisement
Table of Contents
