Connection Center; Connection Options - Zenith SENTRY 2 SY2500 Operating Manual & Warranty

STANDARD CONNECTIONS FOR YOUR TV
I
CONNECTION CENTER
TV CONNECTIONCENTER
ANTENNMCABLE
75-ohrn antenna or cable-TV connection
to yoLr TV. Attach your antenna, cable-
TV line or VCR to thi,; jack.
,CONNECTION OPTIONS
Your TV may be connected in many different ways. The following illustrations show the most comraon, and recommended connec-
tions for your new TV.
SETUP 1: TV ONLY
If you receive your television signal by antenna or basic cable-
"]Yv' ( no cable box), connect your television as follows:
Cable I Leading from... Connects to,,.
A IIWall Jack- ] TV-
i
75-ohm (round) cable [ "ANTENNA/CABLE"
from Antenna or cable (In) jack.
service.
-B & C I Not required.
NOTE:
[3. If your antenna has a fiat (300-ohm) wire leading from it, you
will have to attach this wire to a 300-75 ohm adapter before
the antenna, can be connected to the TV.
SETUP2: TV AND CABLE BOX
If you receive your television signal from a cable box, connect
your television as follows:
Cable Leading from... Connects to...
A Not required.
B Wall Jack- Cable Box-
75-ohm (round) cable "In" jack.
from Cable service.
C Cable Box- TV-
"Out" (75-ohm cable). "ANTENNA/CABLE"
(In) jack.
TURN OFF POWER OR UNPLUG TV
BEFORE MAKING ANY CONNECTION!
Flat wire
from antenna
(300 ohm,)
t "
TyPIcal CABLE BOX oUT
SETUP 1 and SETUP 2
3o45-o 1 -- 1