Table of Contents
Advertisement
UNIVERSAL
REMOTE
CONTROL
I
AUTO
FIND
OPTION
If you have tried all the codes listed for your brand and type of
product
in the code table, and none of those codes operate
your equipment,
you can use Auto Find to search for the code
you need.
Follow these steps for each product
you are using:
1.. Turn
the product
ON and aim the remote
toward
it.
2. Press
and
hold PRG
with a small
blunt
object
until
the indicator
lights
(about
three
seconds).
3. Press
the mode
key on the remote
for the product
you want
to control:
TV, VCR,
CABLE,
or AUX.
4. Key in code
0-0-0,
then press
ENTER
within
two
seconds.
When
the indicator
light flashes
three times
and remains
lit, Auto Find
is active.
5. Press
and hold
POWER,
then release
it, repeating
this
action
about
once
a second
until the product
turns
OFF.
°
Press ENTER
immedial:ely
to save the code. If your
remote fails to operate the functions
you use most
often, you can re-enter Auto Find and search for a
better code:.
NOTES:
_1 The indicator light should l]a,;h OFF when you press
POWER
and back ON when you release it. If the indicator
light stays on when you press POWER,
Auto Find has
tried all available (:odes. If you finish Auto Find and the
product
you want to control has not turned off, your remote
cannot conlrol that product.
t:3 Pressing
PRG at any time during the use of Auto Find will
cancel Auto Find, and you will have to start agatn.
ON
F'OVVER []
OFF
Equipment to be
controlled
Typical Remote
Control
29s:_-o
4 1
5
Advertisement
Table of Contents
