Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the Windows CD, and the
Windows Setup program starts.
2. Press <F6> and wait for the Windows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press <S>, then press <Enter>. The
Windows Setup screen appears as below:
(2) Select "NVIDIA RAID CLASS DRIVER" and then press <Enter>.
(3) Press <S> again at the Specify Devices screen, then press <Enter>.
(4) Select "NVIDIA nForce Storage Controller" and then press <Enter>. The
following Windows Setup screen appears listing both drivers:
52
Chapter 5 nVIDIA RAID Introduction
52
2004-11-15, 17:37