Setting Up The Bios - Foxconn IGPSK7MA series User Manual

Chapter 5 nVIDIA RAID Introduction

Setting Up the BIOS

1. Start up the computer, then press <Delete> to enter the BIOS setup. Use the
arrow keys to select Integrated Peripherals, then press <Enter>.
2. Use the arrow keys to highlight the RAID Config, then press <Enter>.
3. From the RAID Config window, enable the IDE RAID, the other items would be
activated, then you can enable the disks that you want to use as RAID disks.
Note: Make sure to enable the SATA drives if you are setting up a RAID 0+1
array.
4. Press <F10> to save the configuration and exit.
46
46 2004-11-15, 17:36