Atx Power Connector; Floppy Disk Connector; Ide Connector - Foxconn 915M07 series User Manual

ATX 12V connector
1
This power connector connects the 4-pin 12 V plug from the ATX 12 V power
supply.
CPU socket
2
LGA 775 Socket T is for the Intel
North Bridge controller
3
®
Intel 915G/P/GV supports FSB 800/533 MHz, DDR 333/400 MHz, PCI
Express x16 (only for I915G/P). Intel
phics accelerator.
DDR DIMM slots
4
These four 184-pin DIMM slots support up to 4 GB system memory
using unbuffered non-ECC DDR 333/400 DIMMs.

ATX power connector

5
This 24-pin connector connects to an ATX power supply. The power supply
must have at least 1 A on the +5 V standby lead (+5 VSB).

Floppy disk connector

6
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of
the floppy disk cable.

IDE connector

7
The IDE connector supports Ultra DMA 100/66, PIO Modes 3 & 4 IDE device.
The connector is slotted to prevent incorrect insertion of the IDE ribbon cable.
Flash ROM
8
This 4 Mb flash ROM contains the programmable BIOS program.
6
Chapter 1 Product Introduction
® Prescott-T processor.
® 915G/GV provides an integrated gra-
915M07 Series User Manual