Foxconn 915M07 series User Manual page 30

IrDA Header: IR
This connector supports wireless transmitting and receiving device. Before using
this function, configure the settings of IR Mode from the "Integrated Peripherals"
section of the CMOS Setup.
Fan Connectors: CPU_FAN, FAN1
The fan speed of CPU_FAN and FAN1 can be detected and viewed in "PC Health
Status" section of the CMOS Setup. These fans will be automatically turned off
after the system enters S3, S4 and S5 mode.
22
Chapter 2
915M07 Series User Manual
Installation Instructions
1
+5V
Empty
IRRX
GND
IRTX
IR
1
GROUND
POWER
SENSE
CONTROL
GROUND SENSE
1
POWER CONTROL
FAN1
CPU_FAN