Foxconn 915M07 series User Manual page 53

Delay Prior to Thermal (Default: 16Min)
This option is used to set the delay time before the CPU enters auto thermal
mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.
Thermal Management (Default: Thermal Monitor 1)
This option is used to manage Prescott CPU thermal.
TM2 Bus Ratio (Default: Depend on CPU)
Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-diesensor gose from not hot to hot.
TM2 Bus VID (Default: Depend on CPU)
Represents the voltage of the throttled performance state that will be initi -
ated when the on-diesensor gose from not hot to hot.
Limit CPUID MaxVal (Default: Disabled)
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled.
NX BIOS Control (Default: Depend on CPU)
When disabled, forces the NX feature flag to always return 0. The available
setting values are: Disabled and Enabled.
Chapter 3
CPU Feature Menu
915M07 Series User Manual
BIOS Description
45