Changing The Current Span - Fluke 705 Instruction Sheet

Changing the Current Span

The calibrator's current output span has two settings:
4 mA = 0 %, 20 mA = 100 % (default)
0 mA = 0 %, 20 mA = 100 % (optional)
To change and save the current output span in a nonvolatile
memory (retained when the power is turned off), press U while
turning on the calibrator to mA.
Measuring dc mA
Press so that Measure
is on display.
705 LOOP CALIBRATOR
OFF MEASURE
SOURCE
VDC
SIMULATE
Loop Power
mA
SpanCheck
+
COM
Measure
rt03f.eps