6.
ARROW KEYS
—Control cursor movement when entering data into
the display from the keyboard and scroll through menus
horizontally. See Navigating the Menus later in this chapter.
7.
KEYBOARD
—Standard
characters 0-9 and full alpha character list. The spacebar key is
positioned at the lower right-hand corner, and there is one shift
key and one control key. Special editing keys are located at the
+
positions of numbers 1-4; for example,
SHF
KEY
insert.
8.
FUNCTION KEYS
select menus, menu commands, and menu options. See Navigating
the Menus later in this chapter.
9.
—Two keys, one white and one black. Pressing the
DISPLAY KEYS
white key increases the display brightness. Pressing the black key
decreases the display brightness. Pressing these keys also changes
the viewing angle.
10.
TEST POINTS
—Four test points including a 100–µA test point,
two 0.5–ohm test points, and one ground stud.
11.
EXTERNAL METER POSTS
posts. One for external input (
a 100–mA
CURRENT SOURCE
Rear Panel Controls, Displays, and Connectors
12.
BAR CODE PORT
wand.
13.
—For use with printers compatible with personal
PRINTER PORT
computers.
14.
COM2 PORT
—Receives input locally from the optional keyboard,
bar code scanning gun, or personal computer or terminal. Outputs
data to a personal computer or terminal. Also used by the
medTester 5000C for two-way communication with other Fluke
Biomedical test devices and for data output to personal computers
or a serial terminal. See Chapter 12, Remote Operation. With a
Wedge adapter, this port is expanded to eight ports on the Wedge.
15.
HIGH-LEVEL ECG OUTPUT
waveform at 1 V/mV of the low-level Lead I signal.
QWERTY
-type keyboard with numeric
—Five function keys, F1 through F5. Used to
—Two pair of red and black binding
EXT INPUT)
used for resistance measurements.
—For use with the optional bar code reader
—A ¼" telephone jack with a Lead I
Biomedical Test System
Instrument Familiarity
+2
keys to
SHF
measurements. One for
3
3-3
Need help?
Do you have a question about the medTester 5000C and is the answer not in the manual?