Min Max Record; Saving And Recalling Measurements - Fluke 971 User Manual

971
Users Manual

Min Max Record

When enabled, Min Max Record stores a new measurement
when it is either higher or lower than a previously stored
maximum or minimum measurement. Press N to start Min
Max Record. M appears in the display to indicate Min
Max Record mode is enabled.
The temperature scale switch (°C/°F), Save, Recall,
and Hold buttons, as well as the Automatic Power
Off (APO) switch are all disabled when Min Max
Record is enabled.
To view the stored Minimum, Maximum and Average
readings, press N repeatedly to cycle through all three
stored sets of measurements. You must select wet bulb, dew
point, or ambient before reading their respective Min Max
Avg values. The display indicates which stored set of
readings is displayed. Pressing N a fourth time displays the
present measurement.
To exit Min Max Record mode and resume normal operation,
press and hold N for two seconds.

Saving and Recalling Measurements

The Meter stores up to 99 readings for later recall. Each
memory location stores relative humidity as well as ambient,
dew point and wet bulb temperatures.
4
Note