Whirlpool Duet HT GHW9250ML1 Use & Care Manual page 5

Installation clearances
• The location must be large enough to allow the washer door
to be fully opened,
• Additional spacing should be considered for ease of
installation and servicing.
• Additional clearances might be required for wall, door, and
floor moldings.
• Additional spacing of 1 in, (2.5 cm) on all sides of the washer
is recommended to reduce noise transfer.
• Companion appliance spacing should also be considered,
Washer Dimensions
\\
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
34 _
w
24 in l
(155 o*r 2)
I1"1-_sl,s" _14" I_-
/25 cm) (80 cm) (102 cm)
(310 cm 2).
-- 3"
76 ore)
3"
__(76 ore)
1. Side view - closet or confined area
2. Closet door with vents
Recessed or closet installation - Washer on pedestal
1" _ 27" ---_- _ 1"
/25 cm) (686 cm) /25 cm)
1
!. Recessed area
t
18 rrin'
_=_,=...,¥
16'_ _," _'14"
(25cm) (80cm) /102 era)
2. Side view - closet or confined area
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in? *
(310im2)
o
__ _-
24 in? _
(155 cm 2 )
3" (7.6 cm)
3" (7,6 cm)
_ _ 1" (2,5 cm)
6" (1_.2 crn)
/?:::: :
76"
(193 cm)
L W::::::
Y_
5_//'* _ _ 1_**-:_ _ 27"-_ _ 1 ....
(14 cm) (Z"bcm) 68.6 urn 2.50m
*Min. top and bottom air openings for closet door.
**Externalexhaust elbow requires additional space.
***Wall,door and floor molding may require
additional spacing.