Festool Kapex KS120 Instruction Manual page 20

Sliding compound miter saw

Hide thumbs Also See for Kapex KS120:

Crown stops, used to hold crown molding in position or nested. The crown stops attach to the V-

grooves in the saw's base. One locking knob mounts the crown stops and a knob lock the stop to

set the distance of the stop to match the crown's spring angle. Without the stop portion one the

crown stops act as small extensions.

Saw blades, the heart of any miter saw. Festool offers four saw blades for the Kapex, two for

wood, one laminates and one for non-ferrous metals.

Festool Kapex

With the MFT/Kapex out of

the way we'll look at the

other Kapex accessories, the

saw blades, crown stops and

clamping kit. With the

Festool extension wings not

yet released in North

America I'll show you the

Sawhelper extension wings.

The clamping kit is used to

secure the Kapex to a MFT or

any work table. The kit

includes two bolts and two

fastening knobs. The bolts fit

the recesses in the saw's base

and the knobs screw on from

below the MFT or table.

Page 20