Remove the container
by holding the cap on the container
and pulling toward you.
Filling the Formula
1. Place container
on a flat surface.
DO NOT hold the formula container
by the white nozzle pack as it will come off.
2. Unscrew the cap.
3. Pour the formula into the container
until it is full.
4. Replace the cap.
5. Slide the formula container
back into place until you hear a click.
• For best performance,
check the formula container
before each cycle. The fluid level should be above the red circle to
ensure enough formula is available for the cycle.
• Do not leave the formula container
empty. This can cause the filter to dry out and clog, which will reduce performance.