inserted up into
- What they are and how they are used
WHAT IT DOES
HOW TO USE
Shirts/blouses that button are draped over the Clothes
proper support in
Used to hang
skirts and shorts.
Shorts are hung
by the legs.
Hangs pants to
expose both the
inside and outside !
seam to the
Hanger and then buttoned. For non/buttoned shirts (polo
shirts and blouses), the clothes hanger is inserted into the
shirt from the bottom.
With the clothes hanger on the front notch of the hanger
bar, adjust the width of the Grips to 1'/2 in. less than the
width of the waistband or the legs of a pair of shorts. With
both hands, slide the clothing up into the Grips, making
sure the top of the clothing is all the way up. Do not
squeeze these Grips to open. To remove clothing, pull
handles on Grips toward you.
Hold pants at cuffs seam-to-seam and slide between the
"arms" of the hanger. Drape one leg of the pants over
one of the arms and the other leg over the other arm of
the hanger. The pant leg should hang down about 12 to
Place one end of the Draping Bar into the holes on the right
side of the interior wall. Slide the other end into the opposite
channel on the left side. Place the dress on the hanger and
drape the dress over the Draping Bar.Adjust the bottom of the
dress so that it does not touch the bottom of the cabinet.
For sweaters, hang the sweater over the bar with the arms
supported by the Draping Ban
Two Draping Bars at the same level make a platform for small
pillows, blankets and other household items. Make sure items
do not touch the cabinet sides. The second Draping Bar is
part of an accessory kit that is sold separately (page 14).
Logo faces front
bottom of the