wool, linen and
Silk, rayon, knits,
buttons on front
tension to virtual-
ly all types of
clothes to remove
Do not use on
cashmere, lace or
other fine fabrics
that will stretch.
to the body of
to long sleeves by
Squeeze the handles of the clip to open and insert the
clothing between the pads.
Be sure not to add wrinkles when placing the clothing into
Make sure weights touchfor the best results on button-
down shirts, blouses and skirts.
When placing weights over seams on pants and skirts, be
sure to align the depression in the middle of the pad with
Holding from outside of the shirt, place the spring-loaded
end of the shaper against the left side seam of the shirt.
With your right hand outside the shirt, place the right side
seam against the end of the shaper. Make sure both ends
are against the side seams in order to prevent the shaper
from falling out. Expand the shaper by pulling the right end
of the shaper until there is enough tension to hold the
shaper inside the clothing. Slight pulling in the button area
is normal. To retract the shaper, gently press the button on
the shaper and push the extended side back.
Remove shapers from the black strap. Insert the sleeve
shaper into a buttoned long-sleeve with the straight end of
the shaper being inserted first. Align one side of the
shaper to the seam of the sleeve. Insert the shaper until %
in. of the shaper extends past the cuff. To remove,
squeeze the shaper and remove from the sleeve. (When
storing sleeve shapers, use the black strap to keep