Table Of Contents; Stack Kitsafety; Installation Requirements - Kenmore Elite HE3 Steam Use & Care Manual

Slide-out work surface
Hide thumbs Also See for Elite HE3 Steam:
Table of Contents

Advertisement

Available languages

Available languages

Table of Contents / Indice / Table des matibres
STACK KIT SAFETY ..................................
2
........... 2
............. 5
WARRANTY ...............................................
7
DEL JUEGO PARA APILAR ... 10
.................. 10
INSTRUCCIONES
DE INSTALACION .......... 12
DESLIZABLE ..................................................
14
CUlDADO DE LA SUPERFICIE
DE
TRABAJO DESLIZABLE ................................
14
DE
LAVANDERJA .................................................
15
DE
LAVAN DERIA KENMORE _............................
15
DE
...................... 16
SI_CURITI_ DE L'ACCESSOIRE
POUR APPAREILS
SUPERPOSES ........................................................
17
EXIGENCES D'INSTALLATION
............................
17
D'INSTALLATION ...................... 20
UTILISATION DE L'ETAGERE ESCAMOTABLE.
21
ENTRETIEN DE L'ETAGERE ESCAMOTABLE....
21
GARANTIE DES APPAREILS DE BUANDERIE
KENMORE ®.............................................................
22
GARANTIE DES APPAREILS DE BUANDERIE
CORPORATION
..............................
23
STACK KITSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
Hooked stack brackets (2)
%" (16 mm) pan head
Plastic clips (2)
screws (6)
Foam pads (4)
Slide-out shelf
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Phillips screwdriver
Level
Adjustable
wrench that
Bucket
opens to 1" (2.5 cm) or
Pliers or slip-joint pliers (for
hex-head socket wrench
drain and inlet hoses)
(for removing dryer feet)
IMPORTANT: The stacked washer/dryer
can be installed in an
enclosure. Check the locations of the water supply faucets,
grounded electrical outlets, and gas supply line connection (gas
dryer only). Depending on your application,
longer washer fill
hoses, longer electric power supply cords and a longer flexible
stainless steel gas connector line than those supplied with the
washer/dryer may be needed.
See the Installation Instructions that came with your washer and
dryer for more detailed information.
For closet installation, with a door, minimum ventilation openings
in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents