Weslo BODYSHOP 831.150490 User Manual page 6

o
.
.
o
Before beginning assembly, ea_-efully read
the information on the previous page.
Remove the Left Arm (13) and Right Arm (14)
from the Base (4). Note: The Left and Right
Arms are placed upside down and on the
opposite sides of the Base for shipping.
Lubricate the indicated posts on the Base (4).
Slide the Left Arm (13) onto the post on the left
side of the Base. Tap a 1/2" Axle Cap (7) onto
the post. Attach the Right Arm (14) to the post
on the dght side with a 1/2"Axle Cap (7).
Using the included allen wrench, attach the
Seat Frame (11) to the Base (4) with four 1/4" x
1" Screws (2) and four 1/4" Nylon Locknuts (1).
Be sure that the indicated pin is or=the dght
side of the Base.
Wet the ends of the Right and Left.Arms (13,
14) with soapy water. Slide a Large Pad (35)
onto each Arm.
Insert the Seat Bushing (12) into the hole in the
center of the Seat Frame (11).
Insert the post on the Pivot Plate (39) which is
attached to the underside of the Seat (22) into
the Seat Bushing (12).
Press a 1/2" Bushing (31) into each side of the
Seat Frame (11).
Lubricate both 1 3/4" Pins (25)° Attach each
• side of the Pivot Arm (16) to the Seat Frame
(11) with a I 3/4" Pin and two 1/2" Axle Caps
(7). See the Inset drawing for the proper ori-
entation of all parts.
Insert the Lock Pin (24) Into the indicated hole
in the left side of the Pivot Arm (16) and the left
side of the Seat Frame (11).
13
2
4
3
39
4
16
6