Extreme Networks Ridgeline Installation Manual page 49

6 Specify (verify or change) the ports to use for communication between the Ridgeline server and the
database (default is 10553), between the server and Ridgeline clients via HTTP (default is 8080), and
between the switches and FreeRADIUS server (default is 10559). You can use any port numbers
(numbers between 1024 and 65535 are recommended), except port numbers already in use by
another process, or ports 514, 3873, 8083, 10550, 10554, 10555, and 10556, which are used by
Ridgeline for internal functions. Click Next to continue.
NOTE
If you intend to keep multiple versions of the Ridgeline server on the same computer, to avoid a port
conflict, each Ridgeline server must be configured to use a unique port number to communicate with the
database, or all but one of the Ridgeline servers must be disabled. If multiple versions of the Ridgeline server
are detected on the computer, the older versions are disabled automatically during installation.
Figure 20: Port Information
Ridgeline Installation and Upgrade Guide
Upgrading from EPICenter or Ridgeline Service Advisor to Ridgeline
49