Extreme Networks Ridgeline Installation Manual page 16

Chapter 2: Installing the Ridgeline 3.0 Server
For Linux:
a If you downloaded the installation from the web site, change the permissions on the Linux bin
file as follows:
chmod 755 Ridgeline_3-0_linux32.bin
or
chmod 755 Ridgeline_3-0_linux64.bin
(Skip this if you are installing from the CD).
b Run the executable
on your version of the operating system.
For Solaris:
a If you downloaded the installation from the web site, change the permissions on the Solaris bin
file:
chmod 755 Ridgeline_3-0_solarisSPARC.bin
(Skip this if you are installing from the CD).
b Run the executable
InstallShield will extract the Ridgeline Installation Wizard. This may take a few minutes.
4 The Ridgeline Installer Welcome screen appears.
Click Next to continue.
Figure 1: InstallShield Wizard Welcome Screen
5 If a previous version of Ridgeline is detected, you are notified that the existing Ridgeline services
must be stopped.
16
Ridgeline_3-0_linux32.bin
Ridgeline_3-0_solarisSPARC.bin
or
Ridgeline_3-0_linux64.bin
Ridgeline Installation and Upgrade Guide
, depending