Extreme Networks Ridgeline Installation Manual page 18

Chapter 2: Installing the Ridgeline 3.0 Server
7 Verify or enter a location for the Ridgeline installation. By default this is the directory
C:\Program Files\Extreme Networks\Ridgeline Service Advisor 3.0
/opt/ExtremeNetworks/RidgelineServiceAdvisor3.0
You can type a different directory path, or browse to find the directory in which you want to install.
Click Next to continue.
Figure 3: Installation Destination
8 You are next asked to specify (verify or change) the ports to be used for communication between the
Ridgeline server and the database (default is 10553) and between the server and Ridgeline clients via
HTTP (default is 8080). You can use any port numbers (numbers between 1024 and 65535 are
recommended), except port numbers already in use by another process, or ports 514, 3873, 8083,
10550, 10554, 10555, and 10556, which are used by Ridgeline for internal functions.
NOTE
If you intend to keep multiple versions of the Ridgeline server on the same computer, to avoid a port
conflict, each Ridgeline server must be configured to use a unique port number to communicate with the
database, or all but one of the Ridgeline servers must be disabled. If multiple versions of the Ridgeline server
are detected on the computer, the older versions are disabled automatically during installation.
18
for Windows, or
for Linux or Solaris.
Ridgeline Installation and Upgrade Guide