Extreme Networks Ridgeline Installation Manual page 45

Figure 36: Ridgeline Server Setup Utility
3 Choose one of the setup options:
-
Use this IP address to launch the clients and to talk to the network devices.
This selection is not relevant for a multi-homed system, because it only specifies a single interface
for all communications.
-
Use this host name to launch the clients.
the displayed hostname to communicate with Ridgeline. Ridgeline will determine which IP
address to use to communicate with network devices.
-
Use this host name to launch the clients and this IP address to talk to the
network devices.
with Ridgeline, and choose an IP address from the drop-down list for network device
communication.
4 Optionally, specify a different HTTP port.
5 Click Confirm. A confirmation dialog is displayed.
6 Click OK on the confirmation dialog, then close the setup utility.
7 Start the Ridgeline server.
Ridgeline Installation and Upgrade Guide
If this is selected, clients should use the displayed hostname to communicate
Installing Ridgeline on a Multi-Homed Server
If you choose this option, clients should use
45