Installing A Service Pack Release - Extreme Networks Ridgeline Installation Manual

Chapter 5: Upgrading the Ridgeline Software
Table 3 summarizes the options for installing and upgrading the Ridgeline software.
Table 3: Ridgeline Installation and Upgrade Options
Release Type Contents
Base Ridgeline Major Ridgeline
Installation software release
Service Pack New features
and software
fixes
EPICenter to Major Ridgeline
Ridgeline software release

Installing a Service Pack Release

From time to time, Extreme Networks releases updates to the current Ridgeline software as Service
Packs. Service Packs are minor releases that provide fixes for known problems from previous releases.
A Service Pack is released as a software patch that integrates the Service Pack fixes into an existing
Ridgeline installation. If you already have the Ridgeline software installed on your system when a
Service Pack is released, you can add the Service Pack updates by installing the patch release.
You can install a Service Pack release only on top of an existing base version of the same Ridgeline
release. If you are still running the previous major release, you cannot install the Service Pack release.
Instead, you must first install the full-installation version of the base version software. Follow the
normal installation instructions under
To summarize, upgrading to a Ridgeline Service Pack release consists of the following steps:
1 Install the base version of the Ridgeline software (if it is not already installed).
2 Install the Ridgeline Service Pack.
NOTE
It is strongly recommended that you backup your Ridgeline database before installing a Service Pack. If
you need to uninstall the Service Pack and revert to the previous release for any reason, you will need to restore
the database as it was prior to the upgrade.
60
Available Formats
• Large file
downloadable from the
Extreme Networks
web site
• Smaller file that
installs on top of an
existing Ridgeline
installation and
integrates the Service
Pack features and
fixes into the existing
installation.
• Large file
downloadable from the
Extreme Networks
web site
"Installing the Ridgeline Server" on page
When to Install
You want to perform a
fresh Ridgeline
installation/upgrade to a
new major release.
You already have a
base Ridgeline software
release installed and you
want to install the
Service Pack features
and fixes.
You have a prior version
of EPICenter or
Ridgeline Service
Advisor software
installed and you want to
install the Ridgeline
software.
Ridgeline Installation and Upgrade Guide
How to Install
See "If you are running
an evaluation version of
the Ridgeline 3.1
software, and you want
to retain the information
in your Ridgeline
database, DO NOT
REINSTALL the
Ridgeline software to
upgrade to a permanent
license." on page 20.
See "Installing a Service
Pack Release" on
page 60.
See "Upgrading from
EPICenter or Ridgeline
Service Advisor to
Ridgeline" on page 67.
21.