1.5 REAR PANEL
During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the rear panel.
POWER:
Plug the 120~240VAC power source provided into the power socket.
○
1
ETHERNET: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack;
○
2
Green LED means network is connected, amber LED flickers when data is being
exchanged.
RS232 socket: 9-pin D-Sub control input for RS-232.
○
3
RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ
○
4
devices
Figure 1-2 Rear Panel
9