EverFocus ENDEAVOR 264X4 User Manual page 15

5) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell time can be set
in "Display Setting" tab of the Menu. For more detail about SEQ, please see "Section 4.9.2 Display
Setting-Main M/T SEQ".
6) Display: Press this key to switch display of channels and status bar.
7) Monitor: Switch between Main monitor and Call monitor.
8) Zoom: In full screen mode, 2x electronic zoom. Zoom screen can be moved through arrow keys.
Pressing the zoom key again switches the electronic zoom off.
9) Menu Navigation Keys: Instead of or in combination with a mouse, you can use these keys to
change the Menu settings.
10) Copy: Press this key to enter Copy Menu. For more detail about Copy function, please see "Section
3.13 Copy".
11) JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast forward / fast
Jog
Shuttle
12) System LED
POWER: LED indicating power on.
HDD: LED indicating HDD active
Alarm: LED indicating Alarm active.
Network: LED for network traffic.
Record: LED indicating Record active.
13) Search:
14) Menu/ESC:
15) DVD burner:
16)
►►/I►:
17) ►/ I I:
reverse playback.
JOG (inner wheel): In PAUSE mode, use the jog to move frame by frame. Within
menu functions, use the jog to adjust the values / parameters. Use Jog to highlight
individual cameras.
Use either Shuttle or Jog to switch between MENU parameters.
Press this key to enter Search Menu. For more detail about the Search function,
please see "Section 3.12 Search".
Press this key to enter/exit MAIN SETUP MENU.
DVD+RW burner for DVD model. (D models only) (Replaced by hot swap drive on
"R" models).
Fast Forward playback or step forward playback depending on playback mode.
Forward playback or pause
7