Table of Contents
Advertisement
(6) FIELD CODE LINE : When the system is connected to the Multiplexer, it is used to adjust the field code
of the Multiplexer.
(7) SYSTEM UPDATE :
YES/NO : Updates the system.
YES :
Notice: After the system is updated successfully, be sure reboot the system.
(8) LOAD DEFAULT :
YES/NO :
YES :
LOAD DEFAULT
NO
YES
LOAD DEFAULT
NO
YES
(9) CF RENEW:
(10) PLAY MODE :
:
Press
:
Press
MENU
The values: 00~20
The default value is 13, it is suitable for most of the multiplexers.
If the field code line appears on the top of each playback channel, decrease the value.
If multiplexers can not playback properly ,increase the value.
Copy the update files into Compact Flash card ON PC and insert the
Compact Flash card into the slot, and then press ENTER key to
update system.
Load the Load System.
The double check dialog will appear on the screen.
Press
ENTER
If not, press
key to move the cursor to YES, and then press
key to load default.
ENTER
Two of modes for choice, YES or NO.
YES: will format CF card
NO: will not format CF card
Two of Modes for choice, FIELD or FRAME
or
to move the cursor to the left or right.
or
or Jog Dial to change the value.
key to NOT load default and Exit.
27
Advertisement
Table of Contents
