Table of Contents
Advertisement
The monitored image can be recorded automatically by setting the start and end
times in TIMER SET SETTING MENU, we can set the schedule to record for a whole week.
(1) WEEK: This selects the day for the timer. Records each day's schedule.
(2) START: This is used to start the time recording.
(3) STOP: This is used to end the time for recording.
(4) Speed :
When SPEEED FORMAT is set to HOUR, the recording speed can be set from
2/3 (NTSC/PAL) HR to 960HR.
When SPEED FORMAT is set to FPS, the recording speed can be set form
1~60/1~50(NTSC/PAL)FPS.
(5) Quality : There are six recording picture quality levels
LOWER
LOW
BASIC
STANDARD
HIGH
SUPERIOR
(6) SET: Set "ON" when using timer recording.
Set "OFF" when not using timer recording.
(7) DLY : Record on same schedule every day.
: Press
: Press
2002/04/24
12:00:00
For continuous recording, the quality level is unable to change.(Figure 1) The Seg 1 and Seg 2
will be treated as the continuous recording 08:30~00:00.
If you need to set different quality level, Please set as the Figure2.
Seg 1
Seg2
MENU
:
15 KB
:
20 KB
:
25 KB
:
30 KB
:
35 KB
:
40 KB
or
to move the cursor to the left or right.
or
or Jog Dial to change the value.
In Timer Recording mode, the date/time is Timer date/time
T. RECORD
and the right part shows T . RECORD and Timer recording
.
002 HR
rate.
08:30~17:00
Seg 1
Seg2
17:00~00:00
(Figure 1)
08:30~17:00
17:01~00:00
(Figure 2)
17
Advertisement
Table of Contents
