Table of Contents
Advertisement
ENTER : Press this key to confirm the selection or data changed.
13
14
MENU : Press this key to enter Setup menu.
Remote Control
15
Jog and Shuttle Dial
16
17
Up/ Down : (1) In Menu mode, press those keys to change data.
Left/ Right : In Menu mode, these keys are used to move cursor.
18
LCD Display
2002/04/24
12:00:00
2002/04/24
12:00:00
Front Panel Keypads
IR Remote receiver
Shuttle Dial : In Playback mode, turning the shuttle dial can fast
forward/rewind the picture.
In Pause mode, turning the shuttle dial can slow forward/rewind
the picture.
In Menu mode, turning the shuttle dial can change menu page
forward/rewind.
In Pause mode, turn the jog dial can forward/rewind the
Jog Dial
:
Picture by one frame.
In Menu mode turning the jog dial clockwise increases the cursor
data which show on the system. Turning the jog dial
counterclockwise decreases the cursor data which show on the
system.
(2) In Record/Playback mode, press those keys to change the Record/Playback
speed.
SYS LOAD
002 HR
STANDARD
002
HR
Switch on the power, "system loading" will be shown ten
seconds, both in LCD display & main monitor.
In Standby mode, the date/time is current date/time and the
right part shows the quality and rate setting for normal
recording.
4
Advertisement
Table of Contents
