Setting The Clock And Minute Timer - Tappan TGF365CHTB Owner's Manual

Setting the Clock and
Minute Timer
f
Q Q D
Q I 0 D
S preheat:
S lock
Note: The oven function will not work
f the t me of day c ock is not set.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted, the display will flash "12:00".
1. Push _.
2. Within 5 seconds, push and hold the _}
or
. until the correct t me of
day appears in the display.
Note: The clock cannot be changed during any timed bake or self-clean
cycle•
To Set the Minute Timer
1. Push _er.
2. Push the to increase the time in one minute increments• Push and
hold the _i to increasethe time n 10 m nute increments. The timer can
be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you
push the _ first,
the timer w advance to 11 hours and 59
minutes.
3. The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until _i_ is pushed.
Note: The minute timer does not stag or stop cooking. It serves as an extra
timer in the kitchen that will beep when the set time has run out. The minute
timer can be used alone or during any of the other oven functions. When the
minute timer is in use with any other mode, the minute timer will be shown in
the display. To view other functions, push the function pad for that mode.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the or
v to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push _imer