6: Adjusting The Speaker Levels And Balance; Test Tone - Sony HT-DDW670 Operating Instructions Manual

Hide thumbs Also See for HT-DDW670:
Table of Contents

Advertisement

-- TEST TONE
Adjust the speaker levels and balance while
listeuiug
to the test tone l?'om your listening
position.
Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
Press I/_
to turn on the receiver.
2
Press TEST TONE.
"T. TONE"
appears in tile display and the
test toue is output from each speaker in
sequence.
Frout (left) _
Center _
Front (right)
Surround (right)--+
Surround (lell)--+
Sub
woofer
3
4
Adjust the speaker levels and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 28.
Tips
• To a_liust the level of all speakers at the same
time, press MASTER VOL +1 on the remote or
turn MASTER VOLUME
/+ on the receiver.
• The adjusted value are shown in the display
during a_liustment.
Press TEST TONE again after
adjustment.
The test tone turns ofl.
Note
Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test tone
is output, the receiver switches to the LEVEL menu
automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.
17 GB

Advertisement

Table of Contents
loading

Table of Contents